IP65 120W 14000lm Led Projection Lighting Super Brightness CRI80

1. Lamp Power(W):100W 120W 140W
2. Lamp Luminous Flux(lm):>10000lm/12000lm/14000lm
3. Item Type:Led projection light
4. IP Rating:IP65
5. CRI (Ra>):80
6. Input Voltage(V):AC85-265V 50/60Hz
7. Color Temperature(CCT):Warm White, Pure white, Cool white
8. CCT: 2700-4000K, 4500-5500K, 6000-7500K
9. Lamp Body Material: High purity Aluminum+ toughened glass
10. Application: Building,factory,storage room,public ,parking lot ,exhibition building,domestic block,gymnasium,gas station,Square,advertise,Lawn,Super market Wharf ,Garden and other lighting places.
    

IP65 120W 14000lm Led Projection Lighting Super Brightness CRI80

Specifications:

Description:

1. Adopt Super Brightness Multi-Chip LED Lighting Source, encapsulation by ourselves, Long lifespan, Energy saving, Environment friendly, High efficiency, No strobe, No ghosting, No UV, IR.
   
2. TLD series Led Tunnel Light integrate LED lighting source and the cover of the light, the advantages are no needing extra cover, the volume is small and the weight of the body is light. Which make the led light perfect.
   
3. The Lighting source of the led tunnel light is using super bright big size LED chip, It’ s single led chip with top quality which lumen is up to 120lm/W, Using high efficiency PC lens and sand blast oxidation light cover which can solve the problems such as light loss and color shading. It can assure the uniformity of flux and color.
   
4. Using high efficiency thermal conductivity silicon, it’s assured the heat sink of the light, the temperature of the junction is not pass 65 ℃, which is effective controlled the light degradation, the lifespan for the led light is over 30000 hours.
   
5. High efficiency intelligence Driver and very professional design which makes the surface temperature of the light body less than 60℃. The life span for the driver is over 30000 hours.
   
6. The range for the input voltage is wide. Which make the led Tunnel Lightare available for the global. Unique protection circuit and exact constant current system assure the abilities such as anti-interference and stability of the light.
   
7. Our LED Driver are approved CE CB EMC GS TUV,DC12V,24V are available, which can be used for solar.
   
   

Application:

LED Tunnel Lightis available for Building,factory,storage room,public ,parking lot ,exhibition building,domestic block,gymnasium,gas station,Square,advertise,Lawn,Super market Wharf ,Garden and other lighting places.

Competitive Advantage:




1. TLD has been established for long years with good reputation;

2. Professional Manufacturer export to all over the world;
3. All led chips (Bridgelux/Epistar) and led driver are under TLD control;

4. TLD LED Lights are packaged with very strong and beauty regular carton.

5. Cooperate with DHL/UPS/Fedex/TNT for long years, the cheapest, safety &fastest freight will be offered in 24 hours.

6. TLD LED Lights are adopted with rubber cable and unique design, which insure the finished lights elegant and attractive.



Attention

1. In order to make sure the light can work safety and stability, the ground line should be connected the earth.

2. When connecting the wires please turn off the power, and check whether the wires are connected correctly. Never connect the wires in opposite way, or the power should not be turned on.

3. Please keeping the trip bolt being fastening and reliable, in case of the light fall down of looseness.

4. The voltage can’t over AC85-265V, or the damage can’t be repaired.

5. Please keep the hook which has screw thread into the e-box tapping hole, in sure the hook is tightened, using M4 screw hook to fasten the coin slot screw to prevent the looseness of the screws.

6. When finishing connecting the wires, please using the insulation gummed tape to convolve the wires, confirm the insulation and solve the waterproof problem.